Filter
Top Products
72
The Data Viewer menu has four categories: GPS Data, Navigation, Trip
Calculator and Time. Each category has its own data option menu.
Ground Speed flashing on Two Position Map page (left). Data Viewer
menu with no open categories (center). GPS data category opened with
Ground Speed selected (right).
2. Select a data category. If the desired category is flanked by a "+", a
list of data options will appear when you highlight the category and
press
ENT. After opening a category it will have a "–" next to it. To close
the category, highlight it and press
ENT.
4. Open the desired category and use ↑ ↓ to select the desired data op-
tion and press
ENT to turn it on (check) or turn it off (uncheck) and
press
EXIT.
5. If you want to change the data in another digital data box, use ↑ ↓
and press
ENT when the desired box is highlighted. If you are satisfied
with the current display, press
EXIT to return to normal operation.
A Page display can show a limited number of data boxes. You can not
turn them off or add more data boxes.
GPS Simulator
The GPS simulator simulates real world navigation. It is a great way to
practice using your unit. You can set the starting location by entering
latitude/longitude or from a stored waypoint, map place or POI location.
You can steer the position arrow and change speed on the map by using
the arrow keys —
STEER WITH ARROWS command — or by setting the track
and speed in the dialog boxes provided on the simulator menu screen.
To get to the GPS Simulator:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT.
2. Press ↓ to
GPS SIMULATOR|ENT. The GPS Simulator Menu appears.