Filter
Top Products
107
3. If you're looking for nearest, the IntelliMap 320 says it is calcu-
lating, then a list of waypoints appears. The closest is highlighted at
the top of the list and the farthest at the bottom of the list.
Calculating message, left, and list of the nearest waypoints, right.
4. To see location information on the closest (highlighted) waypoint,
press
ENT
and the Waypoint Information screen appears. (If you wanted
to, you could select another waypoint from the list with the ↑ or ↓ keys.)
A. To navigate to the waypoint, press
ENT
. (The Go To Waypoint
command is already highlighted.) The IntelliMap 320 will show
navigation information to the waypoint.
B. To find the waypoint, press ↓ to
F
IND
|
ENT
. The Map Page ap-
pears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press
EXIT
re-
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press
ENT
|
ENT
. B. Or you can jump
down to the lower selection list by pressing
ENT
, then press ↓ or ↑ to