Filter
Top Products
22
3. MENU – Press this key to show the menus and submenus, which
allow you to select a command or adjust a feature. This also accesses
search functions for streets, intersections, addresses and highway exits.
4. ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, move the map cursor and enter data.
5. ENT/ICONS (Enter & Icons) – This key allows you to save data, ac-
cept values or execute menu commands. It is also used to create event
marker icons.
6. EXIT – The Exit key lets you return to the previous screen, clear
data or erase a menu.
7. WPT – (Waypoint) The Waypoint key is used to save and recall way-
points, search for waypoints and access the waypoint list. It also
launches the Point-of-Interest (POI) search menus and is involved in
some navigation functions.
8. ZOUT – (Zoom Out) – This key lets you zoom the screen out. Zoom-
ing out lets you see a larger geographic area on the map. Less detail is
seen as you zoom out.
9. ZIN – (Zoom In) – This key lets you zoom the screen in. Zooming in
lets you see greater detail in a smaller geographic area on the map.
Power/lights on and off
To turn on the IntelliMap 320, press
PWR
. As the unit powers up, the
Map Page is displayed first. (To switch to another page, press
PAGES
|← or → to Page Name|
EXIT
.)
To turn on the backlight, press
PWR
again. The IntelliMap 320 has
three backlight levels to select from. Repeatedly pressing
PWR
will cycle
through the backlight settings and turn off the backlight.
Turn off the unit by pressing and holding the
PWR
key for 3 seconds.
Main Menu
The IntelliMap 320 has a Main Menu, which contains some function
commands and some setup option commands. The tutorial lessons in
this section will deal only with functions, the basic commands that
make the unit do something. The GPS will work fine for these lessons
right out of the box with the factory default settings. But, if you want to
learn about the various options, see Section 5, System Setup and GPS
Setup Options.