Filter
Top Products
24
Browse MMC Files command: this allows you to view the installed
MMC card and the files it contains.
Pages
The IntelliMap 320 has three Page displays that represent the three
major operating modes. They are the Satellite Status Page, the Naviga-
tion Page and the Map Page. They are accessed by pressing the
PAGES
key, then using → or ← to select a Page. (Clear the Pages Menu by
pressing
EXIT
.)
Pages Menu, showing some Map display options.
Satellite Status Page
The Satellite Status Page, shown, provides detailed information on the
status of the unit's satellite lock-on and position acquisition. To get to
the Satellite Status Page: Press the
PAGES
key, then use → or ← to se-
lect
S
TATUS
. (Clear the Pages Menu by pressing
EXIT
.)
No matter what Page you are on, a flashing current position indica-
tor/question mark symbol and flashing GPS data displays indicate that
satellite lock has been lost and there is no position confirmed. The Sat-
ellite Status Page shows you the quality and accuracy of the current
satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers
have stopped flashing!