Eagle Electronics 480, 480DF Fish Finder User Manual


 
111
Create Waypoint on Map
1. Use the arrow keys to move the cursor to the place where you want
to make a waypoint.
2. Press
WPT|WPT. The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map.
Create Waypoint by Entering a Position
1. Press WPT| to SUBCATEGORY column| to NEW|ENT.
2. Press to
ENTERED POSITION|ENT| to CREATE|ENT.
3. Press to
LATITUDE|ENT. Enter the latitude by pressing or to
change the first character, then press to the next character and re-
peat until the latitude is correct. Press
ENT.
4. Press to
LONGITUDE|ENT. Enter the longitude by pressing or to
change the first character, then press to the next character and repeat
until the longitude is correct. Press
ENT, then EXIT|EXIT to return to the
previous page display. The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map and in the waypoint list.
Navigate To a Waypoint
You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands:
1. Press
WPT| to SAVED|ENT. To look up the nearest waypoint, press
to
NEAREST|ENT; or, to look by name (and scroll through the entire
waypoint list), press
ENT. For this example, look by name.
2. If your waypoint list is a long one, you can spell out the waypoint
name in the
FIND BY NAME box to search for it. (Press or to change the
first character, then press to move the cursor to the next character
and repeat until the name is correct, then press
ENT to jump to the list
below.)
3. If the list is short, you can jump directly to the
FIND IN LIST box by
pressing
ENT. Use or to select the waypoint name, press ENT and the
waypoint information screen appears with the
GO TO command selected.
4. To begin navigating to the waypoint, press
ENT.