Eagle Electronics 480, 480DF Fish Finder User Manual


 
85
Sonar Page, playing a recorded sonar chart in Sonar Simulator mode.
Tip:
The Sonar Simulator can use sonar charts that you or a friend have
recorded (logged) on an MMC card. (To see how, read the entry in
this section on Log Sonar Chart Data.) To play back your own sonar
chart, make sure the MMC containing the chart is installed, then:
1. Press
MENU|MENU| to SONAR SETUP|ENT| to SONAR SIMULATOR|ENT.
2. Press to
CHART USED|ENT.
3. Press or to select chart name|
ENT| to SONAR SIMULATOR
ON|ENT|EXIT.
While you're in the Sonar Simulator menu, don't forget to check
Simulate Position if you want to run the sonar and GPS simulators
simultaneously. As you review sonar logs, you can create waypoints
to mark sites you want to return to.
While the simulator is running, you can switch from one chart log
to another by opening the Sonar Simulator menu and using the in-
structions in step 2 to select a different chart.
Tip:
There's more than one way to play a recorded sonar chart. You can
also turn on the simulator from the MMC files list. Here's how:
1. Press
MENU|MENU| to BROWSE MMC FILES|ENT|ENT.
2. Press or to chart name|
ENT| to PLAY|ENT|EXIT.
"Play"
symbol
flashing
Title bar with chart file name