Eagle Electronics 480, 480DF Fish Finder User Manual


 
62
1. From the Sonar Page, press
MENU| to CHART SPEED|ENT.
2. The Chart Speed Control Bar appears. Press to decrease chart
speed; press to increase chart speed.
3. When it's set at the desired level, press
EXIT.
Depth Cursor
The depth cursor consists of a horizontal line with a digital depth box
on the right side. The numbers inside the box show the depth of the
cursor.
At left, Sonar Page menu with Depth Cursor command selected. At
right, sonar chart with the depth cursor active. The line indicates the
large fish is 34.64 feet deep.
The cursor can be moved to any location on the screen, letting you pin-
point the depth of a target.
1. From the Sonar Page, press
MENU| to DEPTH CURSOR|ENT.
2. The depth cursor appears. Press to lower the cursor line; press to
raise the cursor line.
3. To clear the depth cursor, press
EXIT.
Depth Range - Automatic
When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. However, depending upon the bottom
depth and the current range, you can change the range to a different
depth. To do this:
1. From the Sonar Page, press
MENU| to DEPTH RANGE|ENT.
Cursor line
Depth box