Eclipse - Fujitsu Ten CD8455 Marine Radio User Manual


 
107
How to operate the tuner
VIII
Entering stations into memory automatically
(The automatic preset mode: ASM)
Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1 FM2 FM3 AM in order
each time the button is pressed.
Press the [SEL] button for more than two second until a
beep is heard.
The automatic preset mode starts.
The [ASM ON] indicator on the screen flashes, and stations are
automatically entered in memory under buttons [1] to [6].
These buttons are called preset buttons.
Pressing the preset buttons ([1] to [6]) allows you to make one-
touch station selections. The frequency of selected station is
indicated on.
When a new station is set in memory, the station previously set
in memory will be deleted.
If there are fewer than six receivable stations, the stations set in
the remaining buttons will be retained.
If the vehicle’s battery is disconnected (for repairs to the vehicle or for
removing the receiver), all stations in memory will be lost. In such a
case, set stations in the memory again.
[FM AM] button
[SEL] buttonButtons [1] to [6]
CD8455.book 107 ページ 2004年12月11日 土曜日 午後7時24分