Filter
Top Products
32
ESN security operating procedure
How to cancel the Memory Stick security
The security function can be canceled when the security code that
has been recorded with the deck is entered and verified.
Canceling the security function can be done by entering the security
code into the deck, or by using the Memory Stick.
Canceling the security function by entering the security code
Check that the unit is in standby.
Press and hold the [FUNC] button, then button [6],
and hold both for more than one second.
A [SEC] message appears, then in two seconds it will change
to [- - - -] (Security code input display).
A security code is entered by pressing the buttons
[1] to [4].
Enter a four-digit security code using digits 0 to 9, A to F. The
number (shown on the display) changes in ascending order
between 0 and 9, A and F each time the button is pressed.
Each button number (1 to 4) corresponds to each digit (first to
fourth) of the security code.
Press the [FUNC] button.
If a security code is entered and the deck verifies that it is
correct, [CANCEL] will appear on the display and the security
function will be canceled.
If the security code that is entered does not match the code that is
recorded by the deck, [ERR] will appear on the display for two
seconds and operation will continue as normal without the security
function being canceled.
Buttons [1] to [4]
[FUNC] button
Button [6]
CD8455.book 32 ページ ２００４年１２月１１日 土曜日 午後７時２４分