Filter
Top Products
27
ESN security operating procedure
III
How to cancel the Key CD
Check that the unit is in standby.
Press and hold the [FUNC] button, then button [6],
and hold both for more than one second.
A [SEC] message appears, then in two seconds it will change
to [DISC].
Press the [OPEN] or [CD ] button.
The front panel opens; The CD8455 is now ready for your Key
CD in the CD slot.
Insert your Key CD into the slot.
A [CANCEL] message appears, then the Key CD is ejected.
The Key CD is cancelled.
Press the [OPEN] or [CD ] button.
The front panel closes.
● If there is a problem with the inserted CD, an [ERR] message
will appear for two seconds and the CD will be ejected. Reinsert
the ejected CD.
● If a CD causes the [ERR] message to appear twice in a row, a
[CHANGE] message will appear for two seconds. Try another
CD.
●
Copy Protected CD and MP3/WMA CD-ROM cannot be programmed
for Key CD security.
● The Security indicator will flash whenever the vehicle's ignition
is switched off.
If a CD has already been inserted, a [SEC] message appears, and
then the front panel opens and the CD is ejected.
● This process cancels the protection for ESN deck.
● If power to the ESN deck is disconnected, then reconnected, a
Key CD will not need to be inserted in order to return the unit to
normal operation.
● Inserting a CD other than the Key CD will not cancel the
protection. Instead, the display [ERR] for two seconds, then the
normal CD playback mode will activate.
CD8455.book 27 ページ ２００４年１２月１１日 土曜日 午後７時２４分