Eclipse - Fujitsu Ten CD8455 Marine Radio User Manual


 
88
How to operate the MP3/WMA player
Listening to MP3/WMA file
Press the [DISC MS] button for less than one second to
switch to the CD player mode.
This starts MP3/WMA file play.
Disc mode from CD player Memory Stick player in order each
time the button is pressed.
If an external CD changer is connected, each additional press of the
[DISC MS] button will switch modes from CD changer 1 CD
changer 2 Memory Stick player CD player.
A changer or player with no discs loaded will be skipped.
Playback may be intermittent when there is a scratch on a CD
or when the recorded side is dirty.
Only two external CD changers may be connected.
Note
When music data recorded in the normal way (CD-DA) is
present on the same disc with MP3/WMA music files, the
normally recorded music data will be played. To listen to
the MP3/WMA music files, press button [3] for more than
one second.
When a non-MP3/WMA file is played, "NO SUPPORT" will
appear.
The optional CD changer cannot be used to play MP3/
WMA files.
WMA files protected by license control are skipped.
Playback continues after the skipped file. In the event that
all files are protected by license control the CD-R will not
playback and ìPROTECTî will be displayed.
Button [3]
[DISC MS] button