Filter
Top Products
MLT 2 / BINOS
®
100 F
ATEX Instruction Manual
ETC01035
August 2005
Emerson Process Management Manufacturing GmbH & Co. OHG2 - 18
2-7-2 Category 2 Equipment Mains Connection
2-7-2 Category 2 Equipment
The mains power line cord has to be
connected to the pressurization control unit,
terminals 16, 18 and PE (fig. 2-4).
Fig. 2-5
Terminal location inside control unit
Terminal 16
Terminal 18
PE terminal
Verify that the mains voltage
at the point of installation
meets the analyzer nominal
voltage!