Filter
Top Products
Using The Scope
Acquiring Waveforms
1
19
Working with Noisy Waveforms
To suppress high frequency noise on waveforms, you can
limit the working bandwidth to 10 kHz or 20 MHz. This
function smoothes the displayed waveform. For the same
reason, it improves triggering on the waveform.
To choose HF reject, do the following:
1 Display the INPUT A key labels.
2 Open the Input A menu.
3 Jump to Bandwidth.
4 Select 10kHz (HF reject) to
accept the bandwidth limitation.
Tip
To suppress noise without loss of bandwidth,
use the average function or turn off Display
Glitches.
Using Waveform Mathematics Functions
When adding (A+B), subtracting (A-B), or multiplying
(A*B) the input A and input B waveform, the test tool will
display the mathematical result waveform and the input A
and input B waveforms.
A versus B provides a plot with input A on the vertical
axis and input B on the horizontal axis.
The Mathematics functions perform a point-to-point
operation on waveforms A and B.
To use a Mathematics function, do the following:
1 Display the SCOPE key labels.
2 Open the Waveform Options
menu.