Filter
Top Products
Fluke 192/196/199
Users Manual
58
Saving Screens with Associated Setups
To save a screen in memory location 10, do the following:
1 Display the SAVE/PRINT key labels.
From this point the screen is frozen until you hide the
SAVE/PRINT key labels again.
2 Open the Save menu.
Observe that free memory
locations are indicated by an open
square ( ). Filled memory
locations are indicated by a solid
square ( ).
3 Highlight SCREEN+SETUP location 10.
4 Save the actual screen.
Note
The two record+setup memory locations store
more than what is just visible on the screen.
In TrendPlot or scope record mode the full
recording is saved. In scope mode you can save
all 100 replay screens in a single record+setup
memory location.