Filter
Top Products
6-7
• TRAIN shows a figure between 355-359 if normal. NG appears in case of train error.
• TEST COUNT shows the number of times the test has been consecutively executed.
• At the bottom of the screen there are two major groups of zeroes (0), and they represent the
keys and controls on the control panel and remote controller. Press a key and its on-screen
location shows “1” while the key is pressed and “0” when it is released. Operate a control
and its on-screen location changes as below. When the [GAIN] control is operated the panel
dimmer increases or decreases with adjustment of the control.
GAIN control: Shows 0-127.
Other controls: Shows 0-19.
To quit the test, press the [MENU] key three times.