Filter
Top Products
3-3
3.3 Selecting the Range
The [RANGE] control selects the detection (display) range, in 15 settings. Select the range
according to either the fish species being searched or the depth desired. Each time the control
is operated the newly selected range briefly appears in large characters at the screen top.
Range is permanently displayed at the top right-hand corner of the screen.
Normally the range is set so that the bottom is traced at the lower part of the screen (like an
echo sounder).
Surface
Bottom
RANGE m
Figure 3-3 Range concept
Default vertical fan mode range settings
Unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Meters 10 20 30 40 60 80 100 120 160 200 250 300 400 500 600
Feet 30 60 90 120 150 200 250 300 400 500 600 800 1000 1500 2000
Note 1: Unit of range measurement may be selected for meters, feet, fathoms, passi/braza or
Hiro (Japanese) with UNIT on the SYSTEM SETTING 1 menu. For details see page
5-10.
Note 2: Ranges may be freely preset as desired. For details see page 5-16.