Filter
Top Products
vii
Usage Precautions
• The Motion Sensor MS-100 compensates for ship’s pitching and rolling. However, it does not
compensate for load unbalance.
• If the equipment will not be used for a long time shut off the power to it at the mains
switchboard to prevent battery discharge.
• If the soundome is to be operated while the ship is dry-docked set the transmitter output
power to “minimum” on the COM1 menu. Damage to the train-tilt section may result if it is
operated with maximum transmitter power.
• When the ship is dry-docked check for signs of corrosion on the soundome. Find the reason
for the corrosion and attach a zinc plate to the hull unit as an anticorrosion measure if
necessary.