Filter
Top Products
16
3.4 Bearing Reference
The EBL bearing (and cursor bearing) can be referenced to your ship heading (relative
bearing) or North (true bearing). This radar indicates true or relative bearings with an
R or T in the EBL and cursor data boxes. In the head-up and cursor gyro modes you
can switch between true and relative bearings. In all other modes true bearings are
normally displayed. Heading signal is required to display true bearing.
To select bearing reference, do the following:
1. Left-click the MENU box.
2. Select 2 [MARK] then push the left button.
3. Select 9 [EBL, VRM CURSOR SET] then push the left button.
4. Select 2 EBL1, 3 EBL2 or 6 CURSOR BEARING as applicable then push the left
button.
5. Select REL or TRUE as applicable then push the left button.
6. Push the right button three times to close the menu.
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
EBL1
EBL2
>230.0
°
R<
335.2
°
R
VRM1
VRM2
>0.500NM<
0.980NM
VRM2
VRM1
EBL1
EBL2
VRM1 Box
VRM2 Box
EBL1 Box
EBL2 Box
021.0°R
1.505NM
00:10
+
Cursor
Cursor Data Box
[EBL, VRM, CURSOR SET]
1 BACK
2 EBL1
REL/TRUE
3 EBL2
REL/TRUE
4 VRM1
NM/SM/km/kyd
5 VRM2
NM/SM/km/kyd
6 CURSOR BEARING
REL/TRUE
7 CURSOR RANGE
NM/SM/km/kyd
8 [ CURSOR SHAPE]
9 CURSOR BRG SCALE
360°/32 POINTS