Filter
Top Products
35
6. To edit mark position, select 2 POSITION then push the left button.
7. Spin the scrollwheel to select numeric. Numeric may also be directly entered in
case of keyboard-equipped control unit. After setting position, the values entered
are colored blue.
8. Select 3 CONFIRM then push the left button.
The comment entered is placed next to on-screen mark. If the position of the mark
was changed mark appears at the newly entered position.
9. Push the right button to finish.
Selecting mark color
Mark color is available in red, green, blue, yellow, cyan (light-blue), magenta, and
white.
1. Use the trackball to put the cursor on the arrow in the MARK box at the bottom left-
hand corner.
2. Push the right button to show the MARK (1/2) menu.
3. Spin the scrollwheel to select 0 NEXT then push the left button.
4. Select 3 MAP MARK COLOR then push the left button.
5. Spin the scrollwheel to select color desired then push the left button. Selected color
appears below the MARK box.
6. Push the right button twice to close the menu.
All marks entered after changing mark color will be colored in the newly selected color.
[MARK MENU(2/2)]
1 BACK
2 MAP DISPLAY
OFF/ON
3 MAP MARK COLOR
RED/GRN/BLU/YEL/
CYA/MAG/WHT