Filter
Top Products
39
Erasing track with the cursor
You may erase your ship’s track or any target’s track directly on the screen, by two
points or area. Select the erasure method then erase track.
Selecting erasure method
Select the erasure method for own track and target track as follows:
1. Left-click the MENU box.
2. Select 5 [PLOTTER] then push the left button.
3. Select 8 [DATA ERASE] then push the left button.
4. Select 7 OWN TRACK DELETE or 8 TARGET TRACK DELETE then push the left
button.
5. Select 2POINTS or AREA as appropriate then push the left button.
2POINTS:Erase track between two points.
AREA: Erase all track within an area.
6. Push the right button three times to close the menu.
Erase track between two points
x: Specified point
Erase track within a specific range
Desired location
1 BACK
2 OWN TRACK
RED/GRN/BLU/YEL/
CYA/MAG/WHT/
30%/50%/80%/ALL
3 TARGET TRACK
RED/GRN/BLU/YEL/
CYA/MAG/WHT/
30%/50%/80%/ALL
4 MARK ALL ERASE
NO/YES
5 WPT ALL ERASE
NO/YES
6 NAV LINE ALL ERASE
NO/YES
7 OWN TRACK DELETE
2POINTS/AREA
8 TARGET TRACK DELETE
2POINTS/AREA
[DATA ERASE]