Filter
Top Products
19. RECORDING FUNCTIONS
19-8
19.3.1 How to set conditions of logging
The operator can set the conditions for automatic voyage logging. When your speed
or course equals the amount set here, an entry is made in the [Voyage] log:
• Define the amount of course and speed change which creates a log entry.
• Set the interval of logging, regardless of speed and course change.
To set the conditions of logging, do as follows:
1. Open the menu and select the [Voyage] menu from the [NAVI Log] menu.
2. Set desired limits for speed, course and log interval.
[Speed]: 1 - 10 kn, 1 kn interval
[Course]: 0 - 30°, 1° interval
[Log Interval]: 1 - 4 hr, 1 hr interval
When your speed or course changes by the amount set here, an entry is made in the
[Voyage] log, at the interval selected.
19.4 Chart Usage Log
The [Chart Usage] log stores which charts were used in chart alerts. To open the log,
click [Record], [NAV Log] and [Chart Usage] on the InstantAccess bar. The following
information is recorded in the chart usage log:
• Date and time chart was displayed
• Chart ID
• Center position of display (Lat, Lon)
• Chart source
• Chart edition
• Display scale
• Compilation scale
• The latest update included to chart
• Chart base