Filter
Top Products
36
4.9 Installation Menu
The installation menu mainly contains
items which are set at installation.
1. Turn on the power while pressing the
[MENU/ESC] key. Continue pressing
the [MENU/ESC] key until the
Installation menu appears.
SIMULATION On
TEST ...
LCD PATTERN ...
MEMORY CLEAR
NMEA PORT : In/Out
NMEA MIX : Off
GPS WAAS* : Off
SET BOTTOM LEVEL ..
Installation Menu
* = Setting cannot be changed when
NMEA PORT setting is "IN/IN."
Installation menu
SIMULATION: The simulation mode
provides, without connection of the
transducer, simulated operation of the
equipment, using internally generated
echoes. All controls are operative. The
message “SIM” appears at the top right
corner on the screen when the
simulation mode is active.
1. At the installation menu, press ► to
open the simulation mode options
window.
2. Press ▼ to choose “On” to turn on
the simulation mode.
3. Press the [POWER/BRILL] key
about three seconds to turn off the
power.
4. Press the [POWER/BRILL] key to
turn on the power. “SIM” appears at
the top right corner of the display.
5. To turn off the simulation mode,
select Off at step 2.
NMEA port setup
(NMEA PORT, NMEA MIX)
The POWER port can function as an
input port or input/output port. Change
the setting to “In/In” when connecting
GP-310B/320B and a wind sensor.
When connecting the GP-310B/320B
and a wind sensor, first turn on “GPS
WAAS” (in the Installation menu) and
then select “In/In” as the NMEA port
setting.
1. Turn on the power while pressing
and holding down the [MENU/ESC]
key. Continue pressing the
[MENU/ESC] key until the
Installation menu appears.
2. Choose NMEA PORT, and then
press ► to display the NMEA port
options window.
3. Use ▲ or ▼ to choose In/Out or
In/In as appropriate.
In/Out: Input and Output (default
setting)
In/In: Input only (Available with
connection of the GP-310B/320B
and a wind sensor.)
4. Press ◄, choose NMEA MIX, and
then press ► to display the NMEA
MIX options window.
5. Use ▲ or ▼ to choose Off or On.
Choose On to output input data.
Off: Outputs the data sentences of
LS-4100 only.
On: Outputs the data sentences of
LS-4100 and sentences which are
input from other equipment.
6. To restore normal operation, turn off
the power and then turn it on again.