Filter
Top Products
28
Unit Operation
Setup Menu: Units Tab
Units Tab
The ‘Units’ tab contains settings for ‘Depth,’ ‘Temperature’ and ‘Speed.’
To access the ‘Units’ tab, use the arrow keys to highlight it.
Depth
The ‘Depth’ fi eld can be confi gured to display in Feet (ft), Meters (m)
or Fathoms (fa).
To select a Depth Unit:
1. Highlight the ‘Units’ tab on the Setup Menu.
2. Highlight the ‘Depth’ fi eld and press ENTER.
3. Select ‘Feet,’ ‘Meters’ or ‘Fathoms,’ then press ENTER to accept the
new setting.
Temperature
If equipped with a temperature –capable transducer, or a seperate
temperature sensor, the unit can display water temperature in Fahrenheit
(°F) or Celsius (°C).
To Select a Temperature Unit:
1. Highlight the ‘Units’ tab on the Setup Menu.
2. Highlight the ‘Temperature’ fi eld and press ENTER.
3. Select ‘Fahrenheit’ or ‘Celsius,’ then press ENTER to accept the setting.
Speed
If equipped with a speed sensor, the unit can display the boat’s ‘Speed’
Over Water. The unit can be confi gured to display ‘Miles-Per-Hour’ (mh),
‘Kilometers-Per-Hour’ (kh), or ‘Nautical Miles-Per-Hour’ (kt).
To select a Speed Unit:
1 Highlight the ‘Units’ tab on the Setup Menu.
2. Highlight the ‘Speed’ fi eld and press ENTER.
3. Select ‘Miles/hr,’ ‘Kilom/hr’ or ‘Knots,’ then press ENTER to accept the
new setting.
Depth Selections
Speed Selections
Temperature
Selections
190-00200-00_B.indd 02/19/02, 11:29 AM28