Filter
Top Products
Accessories
38 312497G
Automatic Relief Indicator
Automatic Relief Indicators pinpoint lube line blockage but allow the lube system to continue to supply lubrication to
points that are not blocked. They are used primarily in secondary divider valves. When needed, pressure is relieved
through a vent. When pressure is relieved the spring resets the piston. Because these indicators permit the lube sys-
tem to continue operating when a lube point is blocked, a separate pressure switch connected to an audible or visual
alarm should be used to warn of high pressure.
Rupture Indicator - MH Divider Valves Only
Rupture Indicators are only used on MH divider valve applications where lube system pressures exceed 2500 psi.
The high pressure from a lube line blockage causes a disc to rupture. The lubricant then forces an indicator pin to
protrude, locating the blockage. The high pressure backs up through the system and trips a switch to shut the system
off. When the fault is corrected, the disc must be replaced the pin reset manually.
Pressure PSI Color*
Description
1/8” NPTF
MJ, MH, MS, MXP
1/8” NPSF
w/O-Ring
MH, MS, MXP
1/4” NPTF
MX Only
750 + 20% Blue 563163 563170 563156
1000 +
20% Green 563164 563171 563157
1250 +
20% Yellow 563165 563172 NA
1500 +
20% Red 563166 563173 563158
2000 +
20% Orange 563167 563174 563159
2500 +
20% Aluminum 563168 563175 563160
3000 +
24% Purple 563169 563176 563161
* Color provided for reference only to aid in selection of replacement indicator. Indicators used to be
identified by the color of the spring retainer located in the end of the indicator.
Pressure PSI
Description
1/8” - 27 NPTF
1/8” - 27 NPSF
w/O-Ring
Disc Color
Replacement Disc
3/8” Diameter
2800 + 20% 563228 563229 Green 557422
3700 +
20% 563220 563221 Yellow 557423
4600 +
20% 564355 563222 Red 557424
5500 +
20% 563223 563224 Orange 557425
6400 +
20% 563225 563226 Pink 557427
7300 +
20% 563227 NA Blue 557428
8200 +
20% NA NA Purple 557429