Filter
Top Products
Accessories
312497G 41
Cycle Counters - Part No.: 563444
The purpose of a cycle counter is to give assurance that the lubricant is flowing thru the system. Every “count” indi-
cates one complete cycle of the divider valve. Visual inspection and/or recording of counts provides a constant check
on the performance of your lubricant system and the pump. The Cycle Counter can be used on any MJ, MS, MH, MX
and MXP divider valve assembly.
Cycle Switches
The function of a Cycle Switch is to electrically give assurance that the lubricant is flowing through the system. Actu-
ated by a cycle pin, the switch can be wired to various controls.
NOTE: The cycle switch MUST be attached to a section that is equipped with a cycle indicator pin.
Part Numbers
Series Flo Divider Valves MJ MS/MH MS (Nickel) MX MXP MGO
Cycle Switch and Bracket Assembly
SPDT
563272 563272 563272 563272 563272 563269
Electrical Ratings: 15 amps at 125, 250 and 480 VAC; 1/2 amp at 125 VDC, 1/4
amp at 250 VDC, 6.0 amp at 24 VDC Non-Inductive
Replacement Switch 557781 557781 557781 557781 557781 557781
Cycle Switch and Bracket Assembly
DPDT
564357 564357 564537 564357 564537 NA
Electrical Ratings: 10 amps at 125 or 250 VAC; 0.3 amp at 125 VDC or 0.15 amp
at 250 VDC
Replacement Switch NA NA NA NA NA NA
Replacement Bracket for either
SPDT or DPDT Switch Assembly
557546 557546 557546 557546 557546 560573
Moisture Resistant Cycle Switch
with 6-foot Cable and Bracket
Assembly SPDT
563273 563273 563273 563273 563273 NA
Electrical Ratings: 5 amps at 125 or 250 VAC; Wire Code for Moisture Resistant
Switch: BK (Com), Red (N.C), WH (N.O.), GN (Ground)
Replacement Switch with 6-foot
Cable
557782 557782 557782 557782 557782 NA