Viewing Data
10 312964C
Viewing Data
Press and release the Display button (A). Data appears
on display (B); each screen lasting a few seconds before
going on to the next. See F
IG. 8.
After a tank is refilled from an oil distributor or a
waste oil tank is emptied by a waste oil service
provider, press the Display button on the TLM to
ensure the TLM will maintain the most current
tank volume status. If button is not pushed, the
TLM will automatically read correctly at the next
scheduled tank reading.
Daylight Saving Time (DST) Change
The PC software automatically changes the PC time
when daylight saving time changes occur (Spring and
Fall).
F
IG. 8
Tank Level data can be viewed remotely at the PC,
using the Matrix software.
F
IG. 9:
A
B
100%
Battery
36‚
Fluid
100
Gallons
No RF
Signal
Screen display when
First Display
Second Display
Fifth Display
no RF ACK signal is
received after 10-12
(can program for liters)
Nw ID - A
Tx ID - A
Third Display
TLM ID
03000001
Fourth Display
seconds
Signal
NO PC
Displays when PC
doesn’t respond after
10-12 seconds
The first TLM reading will be 1 hour earlier or later
(depending on the Spring or Fall daylight saving
time change), but all subsequent TLM reading will
be accurate.