Filter
Top Products
20 308639
Pump Matrix
Husky 3275 Pumps, Series C
Your Model No. is marked on the pump’s serial plate. To determine the Model No. of your pump from the following
matrix, select the six digits that describe your pump, working from left to right. The first digit is always D,
designating Husky diaphragm pumps. The remaining five digits define the materials of construction.
For example, a pump with an aluminum air motor and fluid section, TPE seats, PTFE balls, and TPE diaphragms is
Model
D K 3 5 1 5. To order replacement parts, refer to the Part Lists on pages 23 and 24. The digits in the
matrix do not correspond to the reference numbers in the Parts Drawing and Parts Lists.
Diaphragm
Pump Air Motor Fluid Section – Seats Balls Diaphragms
232505* aluminum aluminum – TPE acetal TPE
D (for all pumps) K (aluminum) 3 (aluminum) – 0 (null) 0 (null) 0 (null)
– 3 (316 SST) 1 (PTFE)
– 5 (TPE) 2 (acetal) 5 (TPE)
– 6 (Santoprener) 6 (Santoprener) 6 (Santoprener)
– G (Geolastr) G (Geolastr) G (Geolastr)
P (bolt–through PTFE)
* 232505, Aluminum 3275 Pump, Series C
Model No. 232505 is a private-label aluminum 3275 pump. Other than the label, it is the same
as Model No. DK3525.
* 24D619, Aluminum 3275 Pump, Series A
Model No. 24D619 is a private-label aluminum 3275 pump. Other than the label and the parts listed below, it is the
same as Model No. DK3525.
Ref. No. 54 is Part No. 16D109 SCREW, M12 x 1.75 x 55 mm (2.17”); stainless steel. Qty: 40