Filter
Top Products
ENGLISH
20
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Searching for and saving FM
stations
Setting the search mode
There are two different automatic station search
modes.
1 Press »M« repeatedly on the remote control or
»MODE« on the device until »FM radio« ap-
pears on display.
2 Press »MENU« to open the »FM« menu.
Time/Date
FM Radio
Scan setting
Audio setting
System settings
Main menu
3 Select the option »Scan setting« by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
– Display: »Strong stations only?«.
4 Select your setting (»Yes« or »No«) using
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
5 Press »MENU« to end the setting.
Automatic station search
1 Press and hold » « or » « or press the Jog-
Shuttle. When you release the button, the auto-
matic search stops at the next station.
– If RDS information is transmitted by the
broadcaster, then the device saves the sta-
tion name. If station and title information is
transmitted, it will appear as ticker text after
a short time.
Tuning stations manually
1 Move the frequency forward in brief steps by
repeatedly pressing » « or » «.
– The frequency goes up or down in 50 kHz
steps.
Saving FM radio stations on presets
You can use the remote control to fill 10 presets
with the FM radio stations of your choice. If you
assign the presets again, the previously saved
stations are overwritten.
1 Search for the FM station as described.
2 To save stations, keep pressing the number but-
ton »1...0« until »Preset stored« appears in the
display.
– The stored station with a preset number then
appears in the display.
Note:
7
Button »0« is used for preset 10.
3 To store more stations, repeat steps 1 and 2 as
many times as necessary.
Setting the sound effect “My EQ”
1 Press »EQ« on the remote control to open the
»Equaliser« menu.
2 Select the option »My EQ profile setup« by
pressing » « or » « or by turning the Jog-
Shuttle and confirm by pressing »OK«.
Time/Date
Equaliser
Normal
Flat
Jazz
Rock
Movie
3 Select the option »Bass« by pressing » « or
» « or by turning the Jog-Shuttle and confirm
by pressing »OK«.
4 Select the preferred setting for the bass by
pressing » « or » « or by turning the Jog-
Shuttle, and confirm by pressing »OK«.
Note:
7
Repeat the setting for the treble.
5 Select the option »Loudness« by pressing » «
or » « or by turning the Jog-Shuttle.
Switch the Loudness function on or off by
pressing »OK«.