Filter
Top Products
ENGLISH
38
FM MODE
--------------------------------------------------------------------------------------------------------------------------------------
Selecting the tuner input source
1 Press »M« repeatedly on the remote control or
»MODE« on the device until »FM radio« ap-
pears on the display.
Selecting stations – from presets
1 In the »FM radio« mode, press »1« to »0« on
the remote control to select the presets from 1
to 10;
– The frequency of the station and the preset
number appear in the display and the sta-
tion is then played.
Selecting stations – from the list
Recall Preset
1 Press »FAV«.
2 Select the presets from 1 to 10 by pressing
» « or » « or by turning the Jog-Shuttle.
3 Confirm the preset by pressing »OK«.
– The preset number appears in the display
and the station is then played.
Stereo and mono reception
The device has an auto mode, which switches
automatically between stereo and mono de-
pending on the strength of the reception signal.
1 Press »MENU« to open the FM menu.
2 Select the option »Audio setting« by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
3 Select the push button »No« by pressing » «
or » « or by turning the Jog-Shuttle, and con-
firm by pressing »OK«.
– The auto mode is activated;
or
select the push button »YES« by pressing
» « or » « or by turning the Jog-Shuttle,
and confirm by pressing »OK«.
– The device is switched to mono reception;
unwanted noise interference is suppressed.
Displaying RDS station informa-
tion
If the device is receiving a RDS station, the sta-
tion name and »R.D.S« appear in the display
(if no information is available, the reception fre-
quency appears in the display).
Station and track information appear as ticker
text (radio text). If radio text is not available,
other information can be displayed as an alter-
native.
1 To display information on the current RDS sta-
tion, press »i« repeatedly.
– The following displays appear in succession:
The current programme type (PTY), e.g.
»Pop Music«. »[No PTY]« appears if no
information is available;
the frequency;
the current date.
Note:
7
The information is displayed continuously
until »i« is pressed again.