Filter
Top Products
40
Side
(WideSide® transducer: WideSide® view only)
Side sets which transducer beam from the WideSide® Transducer is shown in the WideSide®
View. A WideSide® transducer must be connected to the 700 Series™ Fishing System. The Side
menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab:
Transducer Select) and can only be accessed from the Sonar X-Press
TM
menu when you are in
WideSide® view.
NOTE: Side requires the purchase of the WideSide® transducer. You can visit our website at
www.humminbird.com to order this accessory online or contact our Customer Resource Center at
1-800-633-1468.
To adjust the Side:
1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is
connected, then highlight Side on the Sonar X-Press
TM
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Side setting.
(L [Left], Both, R [Right], Default = Both)