Filter
Top Products
55
Beam Select
Beam Select sets which sonar returns from the transducer
will be displayed on the screen.
When set to 200/83 kHz, the returns from both beams are blended by starting with the 83 kHz
wide beam return, dimming it, and then overlaying it with the 200 kHz narrow beam return. The
darker 200 kHz narrow beam sonar returns will stand out from the paler 83 kHz wide beam sonar
returns. The Split Sonar View continues to display the sonar returns from each beam in their
respective windows. The blended information is shown in the Sonar View, Sonar Zoom View, and
the Big Digits View. The RTS® Window in the Sonar View and the Circular Flasher View will only
show the returns from the 200 kHz narrow beam.
When set to 200 kHz, only the returns from the 200 kHz narrow beam will be displayed in the
Sonar View, the Sonar Zoom View, the Big Digits View and the Circular Flasher View. The Split
Sonar View will continue to display returns from both beams in their respective windows. The
RTS® Window in the Sonar View will display the returns from the 200 kHz narrow beam.
When set to 83 kHz, the returns from the 83 kHz wide beam will be displayed in the Sonar View,
the Sonar Zoom View, the Big Digits View and the Circular Flasher View. The Split Sonar View will
continue to display returns from both beams in their respective windows. The RTS® Window will
display the returns from the 83 kHz wide beam.
To use Beam Select:
1. Highlight Beam Select on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select either the 83 kHz
beam, the 200 kHz beam, or the 200/83 kHz beam. (200/83 kHz, 200 kHz, 83 kHz,
Default = 200 kHz)