Filter
Top Products
97
Set Map Offset
(Advanced)
Set Map Offset allows you to change the map offset used by your Fishfinder.
The Set Map Offset menu option is available when User Mode is set to
Advanced (see Main Menu: User Mode).
NOTE: The Map Offset will be applied to all maps and not just the map that requires
the correction. The Map Offset should be cleared if a different map is to be used.
To change the Map Offset setting:
1. Press the 4-WAY Cursor Control key to activate the cursor and move it
to the location where the Map Offset will be applied.
NOTE: The cursor must be active in order for this procedure to work.
2. Make sure the User Mode is set to Advanced, then highlight Set Map
Offset on the Navigation main menu.
3. Press the RIGHT Cursor key to set the Map Offset. The Confirm dialog
box will appear. To confirm the setting, press the RIGHT Cursor key
once more. To cancel the setting, press the LEFT Cursor key.
NOTE:If the cursor was not active before you began this procedure, an error message
will appear. Exit the menu, set the cursor, then try again.
Course Projection Line
Course Projection Lineallows you to display or hide
an arrow extending from the bow of the boat that projects your current course, and
shows where the boat will go if you continue on your present course.
To change the Course Project Line setting:
1. Highlight Course Projection Line on the Navigation main menu.
2. Press the LEFT or RIGHT Cursor keys to change the Course Projection
Line setting. (Hidden, Visible, Default = Visible)
Navigation Menu Tab