Filter
Top Products
23
Add or Remove a Trolling Grid: From the Waypoints submenu, select Grid and press the RIGHT
Cursor key to display a list of waypoints. Select the waypoint to which you want to add the grid.
The trolling grid will appear on all of the navigation views, and can be used as a guide when
trolling around a waypoint. The grid can be rotated to any desired heading using Grid Rotation
from the Navigation Main menu. To remove the trolling grid, choose Remove Grid from the
Navigation X-Press™ Menu.
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a
grid to a new waypoint, the original waypoint will lose its target or grid.
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the
trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming in or
out will decrease or increase the spacing, respectively.
Waypoint
Trolling Grid
Map Scale
Chart View with Grid
22
Add a Waypoint Target or Trolling Grid
Add or Remove a Waypoint Target: From the Waypoints submenu, select Target and press the
RIGHT Cursor key to display a list of waypoints. Select the waypoint you want to target. A target
consisting of concentric circles centered on the selected waypoint will appear on all of the
navigation views; the target shows various distance ranges from the targeted waypoint. To
remove the target, choose Remove Target from the Navigation X-Press™ Menu.
Chart View with Target
Map Scale
Waypoint Target
M87_Man_531352-1_A.qxd 12/9/2004 3:28 PM Page 28