Filter
Top Products
Accessory Bus
Use the Accessory Bus to expand the functionality of your
Matrix™. Accessories plug directly into the Matrix™,
enabling Advanced features such as WeatherSense® and
the SmartCast® Wireless Sonar Link. Additional tabs and
menu choices will be added to the menu system
automatically when an accessory is plugged into the unit.
In addition, multiple accessories can be attached
simultaneously. See Accessories Menu Tab and Matrix™
Accessories in this manual, as well as your accessory's
Operations Manual for additional details.
NOTE:
Accessories to enable WeatherSense® and the SmartCast® Wireless Sonar Link require
separate purchases. You can visit our website at www.humminbird.com or contact our Customer
Resource Center at 1-800-633-1468 for additional details.
Powering Up the Unit
Turn on your Matrix™ by pressing the POWER key. The Title
screen is displayed until the Matrix™ begins operation. Your
Matrix™ will begin Normal or Simulator operation,
depending on the presence or absence of a transducer.
Matrix™ 87c Title Screen
Accessory Bus
29
28
GOTO Key
If the Cursor is active, pressing the GOTO key while in any view creates a waypoint
and starts navigation towards that waypoint. If the Cursor is not active, pressing
the GOTO key displays the list of waypoints, so that you can select the waypoint
towards which you want to navigate.
ZOOM (+/-) Key
Press the - or + ZOOM keys while in any of the Navigation Views or the
Sonar Zoom View to change the scale of the view to appear closer or
farther away.
EXIT Key
The EXIT key has multiple functions, depending on the situation:
• If an alarm is sounding, pressing EXIT will cancel the alarm.
• If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view.
• If a menu is active, pressing EXIT will return to the previous level in the menu system.
• Pressing EXIT will cycle through the available views in reverse order.
• If Freeze Frame is active, pressing EXIT will return to a scrolling display.
• If the Cursor is active, pressing EXIT will remove the cursor from the display.
M87_Man_531352-1_A.qxd 12/9/2004 3:28 PM Page 34