Filter
Top Products
10 Intel Server RAID Controller U3-1 (SRCU31)
Quick Start Guide
2 Install Microsoft Windows 2000 or NT Server
a. Boot with the Windows 2000 or NT Server CD-ROM.
b. Press F6 as soon as the first blue screen appears to ensure that
Windows Setup bypasses mass storage controller detection.
c. When prompted to specify a mass storage controller:
• Select S to specify additional storage devices.
• Insert the appropriate SRCU31 Microsoft Windows Installation
Driver Diskette (created in Step 1 above) in the floppy drive and
press Enter.
• Press Enter to select the Installation Driver and continue with
Windows installation (see example for Windows 2000 below).
Windows 2000 Setup Screen Example
d. Windows 2000: Complete the remainder of the Windows 2000
installation and then proceed to Step 3
Windows NT 4.0: After completing the NT installation, install the
following components and software:
Microsoft Windows NT 4.0 Service Pack 4 or greater
Microsoft Internet Explorer 4.00 or greater
3 Install the RAID Software Suite
✏ NOTE
The system should be powered on and logged into Windows with an
administrator’s account before proceeding.
a. Insert the Intel Server RAID Controller U3-1 CD-ROM in the
CD-ROM drive. The setup splash screen appears (If the setup splash
screen does not appear, then run the appropriate setup.exe file:
Windows 2000: <CD- ROM root>\os_setup\win2k\setup.exe
Windows NT 4.0: <CD- ROM root>\os_setup\winnt\setup.exe)