Filter
Top Products
Intel Server RAID Controller U3-1 (SRCU31) 15
Quick Start Guide
13 After the installation is complete, reboot the server.
✏ NOTE
See Chapter 4, “Using the Storage Console” in the user’s manual for
instructions on customizing your RAID volumes using Storage Console.
Setup and Installation for UnixWare 7.1 or 7.1.1
Software Requirements
• SRCU31 CD-ROM
• Hard disk space: minimum 20 MB
• SRCU31 UnixWare
†
Installation Disk (HBA diskette) (one blank high
density floppy diskette required)
• SCO UnixWare 7.1 or 7.1.1 software with Netscape 4.08 or greater*
* Not supplied
Installing UnixWare on a RAID Volume
Follow the required procedure below to install Intel Integrated RAID.
✏ NOTE
When installing UnixWare, create only one RAID volume on which the
operating system is to be installed.
1 Create a SRCU31 UnixWare installation disk (HBA diskette): Insert the
Intel Integrated RAID CD-ROM into the target system and restart the
system to boot from the CD-ROM. When the ROM-DOS Startup Menu
appears select option #1, Make Diskettes. When the Select a diskette to
create screen appears, select UnixWare Installation. A command window
appears. Insert a blank high-density diskette in drive A: and press Enter to
create the UnixWare Installation Disk. Alternatively the CD-ROM can be
inserted into a different system running Windows 95, 98 or NT. The CD-
ROM’s auto-run feature will bring up a menu that will allow creation of
the UnixWare Installation Disk. If more than one RAID volume is required,
complete this installation and then use Storage Console to create multiple
volumes.
CAUTION
Insert the SRCU31 UnixWare installation disk 1 (of 2 disks) and reboot.
Install the OS using the install instruction provided in UnixWare 7
Installation Guide manual. UnixWare will prompt you to install Host Bus
Adapter diskette. At that time insert the UnixWare Installation diskette
created in Step 1.
2 Use only the version of the SRCU31 UnixWare installation disk (HBA
disk) that is provided on the CD or available from the Intel Web site for
installation of this adapter. Do not use a HBA disk available from the
vendor to install this product.