Filter
Top Products
8
ScAn delete/Add
You can add and remove zones and/or channels/group IDs to and from your scan
list.
1
Select your desired zone and/or channel/group ID.
2 Press the key programmed as Scan Delete/Add to remove a channel or press
and hold the key for approximately 1 second to remove a zone.
• When a channel is added to scan, the icon appears on the display.
• When a zone is added to scan, the
icon appears on the display.
ScAn reVert
The Scan Revert channel is the channel selected when you press the PTT switch
to transmit during scan. Your dealer can program one of the following types of
Scan Revert channels:
• Selected: The last channel selected before scan.
•
Selected + Talkback: Same as “Selected”, plus you can respond to calls on the
channel at which scan is paused.
•
Priority: The Priority channel.
•
Priority + Talkback: Same as “Priority”, plus you can respond to calls on the channel
at which scan is paused.
•
Last Called + Selected: The last channel on which you receive a call or the last
channel selected before scan, whichever operation occured latest.
DTMF CALLS
Note: To make DTMF calls, you must use an optional microphone with a DTMF keypad.
mAnuAl diAling
1 Press and hold the PTT switch.
2 Enter the desired digits using the keypad.
• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTT
switch to transmit; you can make the call simply by pressing the keys.
AutodiAl
Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.
1 Press the key programmed as Autodial.
2 Press / (if the key assignment list selection is congured as “Enabled”) or
<B/C> to select an autodial list number.
• You can also enter a number from 01 ~ 16 directly using the keypad.
3 Press the PTT switch to make the call.