Filter
Top Products
16
BACKGROUND OPERATIONS
time-out timer (tot)
The Time-out Timer prevents you from using a channel for an extended duration.
If you continuously transmit for a preset time, the transceiver will stop transmitting
and an alert tone will sound. Release the PTT switch.
AuxiliAry port
Press the key programmed as AUX to activate the auxiliary port. The auxiliary
port is used with optional boards.
• The icon appears on the display when the auxiliary port is active.
buSy chAnnel lockout (bcl)
If BCL is set up by your dealer, you will be unable to transmit if the channel is
already in use.
• “BUSY” appears on the display when you press the PTT switch. Use a different channel
or wait until the channel becomes free.
If your dealer has programmed BCL Override for your transceiver, you can
override the BCL by pressing the PTT switch again, immediately after releasing it,
when the channel is busy.
ptt id
PTT ID is the transceiver unique ID code which is sent each time the PTT switch
is pressed and/or released.
compAnder
If programmed by your dealer for a channel, the compander will remove
excessive noise from transmitted signals, providing higher clarity of signals.
trAnSmit power
Your dealer has programmed a transmit power level for each channel. Power
levels can be high or low for TK-7360/ TK-8360 transceivers and high, medium, or
low for TK-7360H/ TK-8360H transceivers.