Kenwood TK-7360 Marine Radio User Manual


  Open as PDF
of 22
 
ii
CONTENTS
GETTING STARTED ................................................................................................1
GETTING ACQUAINTED .........................................................................................
3
PROGRAMMABLE FUNCTIONS .............................................................................
5
BASIC OPERATIONS ...............................................................................................
5
SCAN ........................................................................................................................
7
DTMF CALLS ...........................................................................................................
8
SIGNALING ............................................................................................................
10
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION ................................... 11
ADVANCED OPERATIONS ....................................................................................
13
BACKGROUND OPERATIONS ..............................................................................
16
VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT ..........................................
17
PrecauTions
Observethefollowingprecautionstopreventre,personalinjury,andtransceiver
damage.
• Donotattempttocongurethetransceiverwhiledriving;itistoodangerous.
• Do not disassemble or modify the transceiver for any reason.
• Do not expose the transceiver to long periods of direct sunlight, nor place it near heating
appliances.
• If an abnormal odor or smoke is detected coming from the transceiver, switch the
transceiver power off immediately, and contact your
Kenwood dealer.
• Useofthetransceiverwhileyouaredrivingmaybeagainsttrafclaws.Pleasecheck
and observe the vehicle regulations in your area.
• Donotuseoptionsnotspeciedby
Kenwood.
◆ The transceiver operates in 12 V negative ground systems only! Check the battery polarity and
voltage of the vehicle before installing the transceiver.
◆ Use only the supplied DC power cable or a Kenwood optional DC power cable.
◆ Donotcutand/orremovethefuseholderontheDCpowercable.
For passenger safety, install the transceiver securely using the supplied mounting bracket and
screw set so the transceiver will not break loose in the event of a collision.
 previous next