Filter
Top Products
6
n Transceiver Password
To enter the password:
1 Press / to select a digit.
• When using a keypad, simply enter the password digits and proceed to step 4.
2 Press C> to accept the entered digit and move to the next digit.
• Press A or # to delete an incorrect digit. Press and hold A or # to delete all
digits.
3 Repeat steps 1 and 2 to enter the entire password.
4 Press S or to conrm the password.
• If you enter an incorrect password, the transceiver remains locked.
AdjuSting the Volume
Press the Volume Up key to increase the volume. Press the Volume Down key
to decrease the volume.
If Squelch Off has been programmed onto a key, you can use that function to
listen to background noise while adjusting the volume level.
Selecting A Zone And chAnnel/group id
Select the desired zone and channel/group ID using the keys programmed as
Zone Up/ Zone Down and CH/GID Up/ CH/GID Down.
• You can program names for zones and channels/group IDs with up to 10
characters.
n Home Channel/Group ID
You can select your Home channel/group ID by pressing
Home CH/GID.
Press the key a second time to return to your previous channel/group ID.
n Direct Channel/Group ID
You can quickly select a commonly used channel/group ID by pressing
Direct
CH/GID 1 ~ Direct CH/GID 4. Press the same key a second time to return to
your previous channel/group ID (if the key assignment Direct CH/GID return is
congured as “Enabled”).
trAnSmitting/ receiVing
1 Select your desired zone and channel.
2 Press the Calling Alert key to notify others that you are starting a call.
• Simply release the Calling Alert key to stop the tone.
3 Press the microphone PTT switch and speak into the microphone to transmit.
Release the PTT switch to receive.
• For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.