Kenwood TK-7360 Marine Radio User Manual


 
3
;
=B >
2
8




:
@
.
GETTING ACQUAINTED
Front And reAr ViewS
(Power) switch
Press to switch the transceiver ON or OFF.
/ keys
Press to activate their programmable functions {page 5}.
/ keys
Press to activate their programmable functions {page 5}.
TX/RX Indicator
Lights red while transmitting and green while receiving a signal. Flashes
orange when receiving an optional signaling call.
Microphone jack
Insert the microphone plug into this jack.
Status Indicator
Lights blue during a specied mode, based on dealer programming.
/ S / A / <B / C> / n keys
Press to activate their programmable functions {page 5}.
Speaker
Internal speaker.
PTT switch
Press this switch, then speak into the microphone to call a station.
Antenna connector
Connect the antenna to this connector.
ACC connector
Connect the ACC to this connector, via the KCT-60.
External speaker jack
Connect an external speaker to this jack.
Power input connector
Connect the DC Power Cable to this connector.