Filter
Top Products
8
*(77,1*$&48$,17('
Appears when the VOX (Voice Operated
Transmission) function is ON or the Break-in function
is ON for CW mode {page 30}.
Appears when the Frequency Lock function is ON
{page 53}.
Appears when the Speech Processor function is ON
{page 31}.
Appears when the constant recording function is ON
{page 60}.
Reserved for future updates.
Appears when the selected Menu No. is in the
Quick Menu list {page 14}. It also appears when the
transceiver is scanning the frequencies between the
slow down frequency points {page 47}.
Appears when Receive Incremental Tuning function is
ON {page 29}.
Appears when Transmit Incremental Tuning function
is ON {page 31}.
—— E ——
Appears when the RX ANT terminal is enabled {page
50}.
Either “ ” or “ ” appears, depending on
which antenna connector is selected {page 50}.
“ ”
appears while the internal antenna tuner
{page 61} is in-line for operation.
“ ” appears while
receiving when the internal antenna tuner is in-line for
operation. “ ” and “ ” blink while tuning is in progress
{page 50}
.
Appears when the DRV terminal is enabled {page 50}.
—— F ——
(Main DIsplay)
In normal operating mode and various configuration
modes, it displays the transceiver operating
frequency. In Menu mode, it displays the various
menus, and in Adjustment mode, it displays the
adjustment values.
(Sub-display)
When recalling a memory channel, it displays
the Memory Channel name (if one has been
programmed). During split frequency operation,
it displays the frequency. When the following
indications occur simultaneously, information is
displayed in the following order: RIT/XIT frequency,
Split frequency, Memory Name. In Menu mode, it
displays a menu title. In other modes, it displays the
configuration parameters.
Appears when the split-frequency operation is ON
{page 24}.
“ ” appears while VFO A is selected. “ ”
appears while transmitting on a split channel in VFO
A {page 10}. “ ” appears while Menu A is being
accessed in Menu mode {page 14}.
“ ” appears while VFO B is selected. “ ” appears
while transmitting on a split channel in VFO B {page
10}. “ ” appears while Menu B is being accessed in
Menu mode {page 14}.
“ ” appears while a simplex memory channel
is selected. “ ” appears while a split memory
channel is selected {page 41}.
ABC D
EF