Filter
Top Products
PAGE 18 —GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #1 (02/25/14)
COMPONENTS
Figure 3. GB4000 Components
5
3
2
1
4
6
7
1. Lamp Fixture — Made of heat resistant polyester
balloon and four 1000-watt metal halide lamps.
2. Locking Pin — Locks the lamp fixture in place when
attached to the pole on the bracket.
3. Balloon Power Cable — Provides AC power to the
lamps, fan and balloon inflation circuit.
4. Adapter Plate — Attaches to the T-Bar and mast
interface of the light tower to allow the GB4000 to be
installed.
5. Junction Box — Holds the electrical connection and
cables to connect the lamp fixture to the T-Bar and to
the power cable.
6. Support Bracket — Attaches to T-Bar to support
adapter plate (hardware not shown).
7. Connector Cap — Provides protection to the
receptacle on the junction box when not in use.
NOTICE
This adapter plate (item 4) fits most conventional light
tower masts.