Filter
Top Products
GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #1 (02/25/14) — PAGE 27
MAINTENANCE
6. Secure lamp holder on top of the lamp.
7. Reinstall lamp guard.
8. Pull down balloon and zip the bottom zipper to cover
lamp.
REPLACING BALLOON
1. Unzip the top and bottom of the balloon. See Figure 20.
Figure 20. Unzipping Balloon
2. Slide out the old or worn balloon over the top of the
lamp guard assembly. See Figure 21.
Figure 21. Removing Old Balloon
NOTICE
Do not use excessive force when screwing the lamp to
prevent lamp from breaking.
UNZIP TOPAND
BOTTOM
ZIPPERS
BALLOON
REMOVE OLD
BALLOON
3. Slide in the new replacement balloon over the top of
the lamp guard assembly. See Figure 22.
Figure 22. Replacing Balloon
4. Zip up the top and bottom of the new balloon. See
Figure 23.
Figure 23. Zipping Up New Balloon
INSTALL NEW
BALLOON
ZIP UP
NEW BALLOON