Filter
Top Products
PAGE 22 —GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #1 (02/25/14)
JUNCTION BOX MOUNTING
1. Secure the junction box (Figure 8) to the adapter plate
using the supplied bolts (2), lock washer (2), and flat
washer (2). Tighten mounting bolts securely.
Figure 8. Junction Box Mounting
BOLT
(2)
LOCK
WASHER (2)
FLAT
WASHER
(2)
JUNCTION BOX
LAMP
ADAPTER
PLATE
T-BAR
POLE
SETUP
LAMP MOUNTING
1. Place the GB4000 lamp fixture onto the lamp adapter
plate pole as shown in Figure 9.
2. Insert locking pin into hole opening on pole, then insert
cotter pin to lock pin in place.
BALLOON POWER CABLE
1. Connect the balloon power cable (Figure 9) to the 10-
pin receptacle on the junction box.
Figure 9. Balloon Power Cable Connection
PLATE ADAPTER
POLE
JUNCTION BOX
2 FT. (10 PIN)
BALLOON
POWER CABLE
COTTER PIN
BALLOON FIXTURE
LOCKING PIN