Filter
Top Products
GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #1 (02/25/14) — PAGE 23
On the T-Bar (Figure 10) there are four power receptacles J1, J2, J3 and J4. These receptacles provide AC power to the
existing rectangular lamps. When the GB4000 lamp assembly is employed, these receptacles are used to connect the
GB4000. Refer to Figure 10.
Figure 10. Lighting Configuration
1 2 3
4
CB1 CB2 CB3 CB4
ON ONON ON
ON ON
CB1 CB2
T-BAR
JUNCTION BOX
LT12 LAMP
CIRCUIT BREAKERS
NOTE: CABLE FROM LAMP 1
MUST BE CONNECTED FOR
OTHER LAMPS TO OPERATE
AND FOR BALLOON TO INFLATE.
MLT LAMP
CIRCUIT BREAKERS
GB4000
LAMP CABLE CONNECTIONS