Filter
Top Products
42
ATOM 3.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5216-r02 (9/6/11)
FREE SURF MAIN, information includes (Fig. 133):
> Surface Interval time (min:sec up to 59:59, then hr:min) with SURF icon; if no dive, this is time since mode access.
> Graphic FRE.
> Dive number with # icon, up to 99 for that operating period (0 if no dive made yet).
> (PZ+), CF, Battery icons - if they apply.
> TLBG with icon, if any after a NORM or FREE dive.
• M (2 sec) - to access Watch Main.
• A (< 2 sec) - to step forward to FREE SURF ALT 1.
• M (< 2 sec) - to step back to SHOW NDC.
• L (press) - to activate the Backlight.
Upon surfacing during dives, the Dive Main will remain on display for the first 1 minute (with SI in place of Depth) after which the Surface Main will be displayed.
FREE SURFACE GROUP, button operations* >>
These operations apply to all group selections that follow, those marked with * are not repeated when describing each selection.
• A (< 2 sec) - to step forward through selections.
• A (hold)* - to scroll forward through selections.
• M (< 2 sec) - to step back through selections.
• M (2 sec, any time)* - revert to Main.
• No button action (2 min)* - revert to Main.
• L (press)* - to activate the Backlight.
FREE SURF ALT 1, information includes (Fig. 134):
> SI (min:sec, hr:min)* with SURF icon, prior to Last dive.
> Max Depth* with MAX and FT (or M) icons.
> Elapsed Dive Time* (min_sec) with EDT and min_sec icons.
> Graphic LAST, indicating data is for previous FREE dive.
*Dashes if no previous dive conducted while in FREE mode.
• A (< 2 sec) - to step forward to ALT 2.
• M (< 2 sec) - to step back to Main.
FREE SURF ALT 2, information includes (Fig. 135):
> Altitude graphic (EL2 to EL7), blank if Sea level.
> Time of Day (hr:min_sec) with AM (or PM) icon if 12 Hour Format, no icon if 24 Hour.
• A (< 2 sec) - to step forward to CDT.
• M (< 2 sec) - to step back to ALT 1.
CDT (Countdown Timer)
While on the surface, the CDT can be set, started, and stopped. Once set and started, it continues to run in the background
when a dive is started and becomes available as an ALT display.
CDT Lead-in, information includes (Fig. 136):
> Graphics Goto, FRE, and CDT.
• S (< 2 sec) - to access CDT Status.
• A (< 2 sec) - to step forward to SET FA.
• M (< 2 sec) - to step back to ALT 2.
CDT Status, information includes (Fig. 137):
> Graphic OFF (or ON) flashing. If OFF, 0:00 or the CDT if previously set. If ON, the remaining CDT (min_sec) with icons.
> Graphic CDT.
• A (< 2 sec) - to step forward through selections of OFF, ON, and SET.
• M (< 2 sec) - to step back through selections.
• S (< 2 sec) - to save the selection.
>> If OFF or ON is selected, revert to the Lead-in screen.
>> If SET is selected, access the Set CDT screen.
• S (2 sec) - to revert to CDT Lead-in, if no setting change.
Fig. 133 - FREE SURF MAIN
(no dive yet)
FREE SURF GROUP
(selection sequence)
---------------------
ALT 1 (Last)
ALT 2
CD TIMER
SET FA
SEL DIVE OP MODE
SHOW NDC
.
Fig. 135 - FREE SURF ALT 2
Fig. 134 - FREE SURF ALT 1
(Last Dive's Data)
pre dive SI
(min:sec)
Fig. 137 - CDT STATUS
(On, running)
Fig. 136 - CDT LEAD-IN