Filter
Top Products
C1570M-C (5/06) 31
CONFIGURE A CM9700 SOFT ALARM TO REPRESENT AN ENDURA ALARM
1. Use the Endura WS5000 application to configure alarms in the Endura system. Be sure to assign each alarm a unique logical number. These
can be contact alarms or motion alarms. Refer to the WS5000 Operation manual and the Endura Resource CD for instructions.
2. Use the CM9700-MGR software to add a soft alarm for each Endura alarm. Choose alarm physical numbers to match the logical numbers
that you assigned to the corresponding Endura alarms in step 1. Refer to the How to Add Soft Alarms section in the CM9700-MGR Software
Guide for detailed instructions.
Figure 28. Adding a CM9700 Soft Alarm
3. Use the CM9700-MGR software to configure each soft alarm to display on CM9700 system monitors. Refer to the How to Program Alarms
section in the CM9700-MGR Software Guide for detailed instructions.
Figure 29. Viewing CM9700 Alarms
When the alarm is triggered in the Endura system, the alarm information is passed through to the CM9700 matrix system and is displayed on
CM9700 system monitors, according to the settings configured in step 3.