Filter
Top Products
32 C1570M-C (5/06)
MACRO CONFIGURATION
To configure a CM9700 macro to activate a script in the Endura system, complete the following steps:
1. In the Endura system configure a script to complete the desired task. Note that you must use a unique logical number as the script name,
which you will use in the CM9700 matrix system (in step 4 below). Refer to the WS5000 Operation manual and the Endura Resource CD for
instructions on configuring an Endura script.
Figure 30. WS5000 Add Script Dialog Box
2. Use the CM9700-MGR software to add a macro (click the Macros tab, and then click New Macro). Click Edit Steps to open the Macro Editor
window. Refer to the Macros section in the CM9700-MGR Software Guide for detailed instructions.
Figure 31. Adding a Macro to Activate an Endura Script