Filter
Top Products
Supported UltraRes RS232 Commands
Planar UltraRes User Manual 106
Display Green Offset DGO R/W No 0 200 No No
Display Red Gain DRG R/W No 0 200 No No
Display Red Offset DRO R/W No 0 200 No No
EDID Type EDT R/W No 0 1 No No
0 = 4K 30Hz Preferred EDID
1 = 1080p Preferred EDID
2 = 960x2160 Preferred EDID
3 = 1920x2160 Preferred EDID
4 = 4K 60Hz Preferred EDID
Error Log 1 EL1 R No N/A N/A Yes No
Response contains 50 hex digits
representing the first 25 entries in the
error log
Error Log 2 EL2 R No N/A N/A Yes No
Response contains 50 hex digits
representing the second 25 entries in
the error log
Error Code ERR R No 0 TBD No No
0 = None
1 = AC Power Supply 1 Failure
2 = AC Power Supply 2 Failure
3 = AC Power Supplies 1 and 2 Failure
8 = AC Power Status Cable
Disconnected
9 = DC Power Supply Failure
10 = FPGA Initialization Failure
11 = Calibration EEPROM Failure
12 = Overtemp
Bottom Frame Delay FDB R/W No 0 2 No No
Top Frame Delay FDT R/W No 0 2 No No
Firmware Upgrade FWU W No N/A N/A No No
Action will be performed on any
setting value
Gamma Simple GMS R/W No 0 6 No No
0 = 2.0
1 = 1.8
2 = 2.2
3 = 2.35
4 = 2.5
Setting
Command Code
Read/Write
Inc/Dec
Min Value
Max Value
String?
Password
Protected?
Notes